A daylight-visible tail light with 35 Lumens of balanced light to keep you visible in the city, day or night. Paint the city day or night The Flare R City tail light is daytime visible and designed for the city. A wide beam spread, focused optics, and an interruptive flash pattern make it visible from over 400m during the day. A built in ambient light sensor provides auto-brightness control, and the included Quick Connect bracket offers simple removal for recharging via the included USB cable. 35 Lumens of power and the wide visibility angle of the Flare R City tail light make you the biggest distraction on the city streets, day or night. - 35 Lumens provide visibility from over 400m day or night - Wide visibility angle intended for city use - Two day-time visibility modes and two night modes - Day flash 35LM-8hrs, night flash 35LM-16hrs, day steady 20LM-3hrs, night steady 2LM-20hrs - Integrated light sensor for auto-brightness control - Battery save mode at 5% life helps ensure a safe ride home with depleted battery - Quick connect bracket with 16 degree offset compensates for seatpost angle - Includes Quick connect bracket and micro USB charging cable
Replacement lithium ion CR2032 batteries for use in the Femto LED lights. SPEC: 700 mAh, 3.6V.
Multi-purpose performance LED cycling light. Compact, durable and heat-dissipating CNC machined aluminum construction. Ultra-high-output LED delivering up to 300 lumens. Mode Memory function returns to selected mode after turning off. 7 combined lumen and flash modes. Enhanced MOR (Maximum Optical Reflection) lens with built-in side visibility. Integrated cable-free recharging USB stick. Advanced Li-Poly battery for superior run time. - MAX LUMENS: 300 - WEIGHT: 81g (without strap mount) - RECHARGE TIME: 2.5hrs (1A) / N/A (2A)
This mount is designed to securely attach your Light and Motion Seca, Vega, or Stella headlight (sold separately) to your helmet. With a helmet mount, the light is always pointing where you're looking.
Light & Motion's Taz 1200 is the all-in-one handlebar light that outshines many car headlamps and fits in the palm of your hand. Perfect for the most technical singletrack or critical commute where Lumen output is a priority. Featuring: - 1200 Lumen output certified to the FL-1 Standard - Engineered with a 3 LED array using the highest level CREE LEDs. - Sealed, waterproof design – up to 1m. - Custom engineered reflector/optics diffuses the bottom LED to cover an ultra-wide spread down in front and focuses the top two LEDs to penetrate the darkness with a far-reaching beam, without wasting any light. - Beam pattern was engineered to maximize visibility at high velocity with ample beam distance lead-time and the widest beam angle for the sharpest turns. - Side lighting to maximize visibility on roadways with a dedicated button to toggle the side lights on/off. - Secondary Race Mode simplifies your settings to switch between high power with 2 hours run time and low power with 4 hours. - Accurate battery status indication illuminates the power button with three different colors to clearly display remaining battery life with 4 levels. - Universal tool-free mounting system. - Ultralight aluminum heat sink with tapered fin design. - Micro-USB Rechargeable - Charge rate indicator illuminates the power button with three colors to display speed of charge. - Low battery warning and auto shut-off to prevent damage. - Multiple power settings with cruise and secondary race mode Run time/Lumens: - High 1:30 / 1200 - Med 3:00 / 600 - Low 6:00 / 300 - Pulse 9:00 / 300 - Flash 18:00 / 300 - Race High 2:00 / 1000 - Race Low 4:00 / 450
Product details: - Replacement or extra mounts for all Bontrager Flare rear lights - Use to mount Flare lights to seatposts, racks, seatstays, or any other creative spot - Kit includes Flare light mount, two bases, and rubber strap adapters
Lezyne's Go-Pro LED Adapter allows you to mount your Lezyne LED light to any standard Go-Pro mount. This makes it fast and easy to switch swap out your camera and headlight using the same mount.
Key features - Reflector mount for first and second generation Speed Concept seatposts - To use with a Bontrager Flare, use with the Bontrager Flare Horizontal Mounting Kit (sold separately)
Product details - Replacement mounting strap for Bontrager Glo and Ember lights - Silicone strap allows for quick installation and removal of light - Fits 22.2 – 31.8mm handlebars, seatposts, and much more
Need to replace a strap on the compact Vis 180 Pro taillight or the front mount of the Vis 360 Pro? This is a durable direct replacement that installs in seconds and can be cut to the preferred length.
Product details - Perfect for mounting compatible Flare taillights to rear rack - Includes a bolt and star washer for extra security - Easiest to install with light installed for better leverage
Quick, easy straps for your Flare and Ion lights Product details (Front - Ion) - Fits all Ion headlights - Works best with 22.2 - 35.0mm handlebars Product details (Rear - Flare) - Fits all Flare tail lights - Works best with 27.2 - 31.6mm seatposts - Includes 16 degree offset for optimized use on seatposts
Put a Flare almost anywhere - For use with all Flare tail lights - Perfect for attaching to a seat pack, belt, backpack, or anything with a loop - 2g
Taillight Seat Stay Mount
- Attaches to rear racks - Compatible with: Blinky 3,5,7 and Superflash - 25mm between each of the top horizontal holes (center to center) - Requires an "L bracket" that typically comes with a rear rack. If your rack is missing the L bracket, you can purchase Planet Bike's rack hardware pack
Mounting bracket for MSW front White Bat Headlight. - Includes 1 front mounting bracket
Replacement bracket for Pico and Tigermoth lights. - Includes 1 front bracket, 1 rear bracket, and 2 mounting straps
- Fits seatpost (up to 31.8mm) or seatstay - Compatible with: Blinky 3,5,7, all Superflash lights and Blinky Safety rear light - Use with Blinky Safety Front light bracket to fit oversize (~31.8mm) handlebars
Optional Accessory Rear rack Bracket for mounting most CatEye Taillights to rear racks with 50/80 mm spaced mounting holes.
SP-12 Flex-Tight Seatpost Bracket for most CatEye taillights
- Mounts most AA flashlights to handlebars and helmets - Ideal low-cost lighting alternative for cyclists
The Bontrager Blendr Saddle Mount makes riding safe easier than ever. All you need are two secure bolts to easily and cleanly attach compatible Bontrager Flare tail lights so you can always be seen when you ride. - Blendr mount allows for integrated rear light attachment - Easily and securely mounts to compatible saddles - Includes mounting hardware (2—3mm M5 bolt) - Torque included M5 mounting hardware to 2Nm
- Quick Charge USB-to-Micro-USB cable to charge your rechargeable Bontrager lights - Also able to charge most other Micro USB systems - 9 inches/23cm long
- Quick Strap mounts, adjusts or removes in seconds without tools - Fits 25.4-35mm handlebars - Compatible with Blazes, Beamers, 1200 and Super Spot
- Fits 25.4-31.8mm handlebars - Compatible with Blaze, Beamers, 1200, 5000x and Super Spot
The Portland Design Works Mission Control 2.0 Headlight Mount is now easier to use! Wrap the heavy-duty UV-proof rubber strap around your handlebars and you're ready to blast off in seconds. - Fits 22.0-31.8 mm diameter handlebars - Compatible with all PDW headlights.
Mount your tail light to the reflector tab on the back of a rear cargo rack with this Rack Bracket from Portland Design Works. - Compatible with all PDW rear lights except the Asteroid and Fenderbot - Horizontal holes are 50mm apart to fit European rack standards - Vertical holes are 18mm apart to fit most reflector mounts
Product details - Compatible with USB rechargeable Flare taillights and all Ion headlights - Fits handlebars/seatposts 22.2-35mm and Ride Tuned Seatmast Caps - Silicone body with a tooled adjustment clamp diameter - When rotated for a Flare, the bracket is angled to compensate for an angled seat tube - 25g
USB cable for USB rechargeable batteries. System Compatibility: - Lumina Series - Lightning Bug 120 USB - Sentinel 2W USB - Solas 2W USB - Stinger USB
The NiteRider Tail Light Strap Mount allows for quick installation and fitment on to standard seatposts. It features a quick release tab that allows you to remove just your tail light, leaving the strap mount installed on the seat post; ideal for when you leave your bike unattended or when it’s time for a recharge.
Page 1 of 7 Next page