Replacement lithium ion CR2032 batteries for use in the Femto LED lights. SPEC: 700 mAh, 3.6V.
Multi-purpose performance LED cycling light. Compact, durable and heat-dissipating CNC machined aluminum construction. Ultra-high-output LED delivering up to 300 lumens. Mode Memory function returns to selected mode after turning off. 7 combined lumen and flash modes. Enhanced MOR (Maximum Optical Reflection) lens with built-in side visibility. Integrated cable-free recharging USB stick. Advanced Li-Poly battery for superior run time. - MAX LUMENS: 300 - WEIGHT: 81g (without strap mount) - RECHARGE TIME: 2.5hrs (1A) / N/A (2A)
Lezyne Mega Drive is built with a CNC sculpted aluminum body, MOR Optics, and Constant Current power management driving dual LEDs to put out an incredibly bright 1000 lumens. The Mega Drive features a USB-rechargable battery that's easily replaceable and a button that allows the user to check the power level during use and recharging. You can choose between flash (200 lumens/15 hours), economy (300 lumens/5 hours) enduro (600 lumens/2.5 hours), blast (1000 lumens/1.7 hours), and overdrive (1200 lumens/1.3 hours) to optimize power. And, it includes a handlebar mount.
Light & Motion's 550 Commuter Combo includes their Urban 550 headlight and Vis 180 Micro taillight. It's a great setup for commuting or even hitting some singletrack after work. The Urban headlight is super bright with high-output LEDs and up to 550 lumens to light your way and 3 steady modes plus a flashing one. This small, self-contained light slips on and off your bars with ease and without tools and has an integrated rechargeable lithium-ion battery that lasts from 1.3 to an impressive 18 hours. It even has lights on the sides for additional safety in traffic. And, you'll love the Vis 180 Micro taillight that boasts 25 lumens of brightness and shines in 180 degrees for extra safety. It boasts 4 modes for up to 20 hours of run time, a built-in lithium-ion battery and a no-tools easy on/off mount. Both lights are USB charged and have low-battery indicators to keep you safe.
Light & Motion's Taz 1200 is the all-in-one handlebar light that outshines many car headlamps and fits in the palm of your hand. Perfect for the most technical singletrack or critical commute where Lumen output is a priority. Featuring: - 1200 Lumen output certified to the FL-1 Standard - Engineered with a 3 LED array using the highest level CREE LEDs. - Sealed, waterproof design – up to 1m. - Custom engineered reflector/optics diffuses the bottom LED to cover an ultra-wide spread down in front and focuses the top two LEDs to penetrate the darkness with a far-reaching beam, without wasting any light. - Beam pattern was engineered to maximize visibility at high velocity with ample beam distance lead-time and the widest beam angle for the sharpest turns. - Side lighting to maximize visibility on roadways with a dedicated button to toggle the side lights on/off. - Secondary Race Mode simplifies your settings to switch between high power with 2 hours run time and low power with 4 hours. - Accurate battery status indication illuminates the power button with three different colors to clearly display remaining battery life with 4 levels. - Universal tool-free mounting system. - Ultralight aluminum heat sink with tapered fin design. - Micro-USB Rechargeable - Charge rate indicator illuminates the power button with three colors to display speed of charge. - Low battery warning and auto shut-off to prevent damage. - Multiple power settings with cruise and secondary race mode Run time/Lumens: - High 1:30 / 1200 - Med 3:00 / 600 - Low 6:00 / 300 - Pulse 9:00 / 300 - Flash 18:00 / 300 - Race High 2:00 / 1000 - Race Low 4:00 / 450
Be seen with Light & Motion's Urban 180. It's a powerfully bright commuter light in a small, self-contained package. Its high-output LED bulbs boast 3 steady modes and a flashing one providing up to 180 lumens to light your way. The powerful Lithium-Ion battery delivers run times ranging from 2.6 to an amazing 20 hours. Two points of illumination on either side greatly improve safety and the whole system only weighs 112 grams!
Visibility is critical to ride safety, especially after dark. To make sure drivers see you from the rear, turn on Light and Motion's Vis 180. This seriously bright taillight announces your presence with 35 lumens of visibility. Designed for the urban environment, it shines light in 180 degrees for extra safety. For added convenience, the Vis 180 weighs just 110 grams and charges via a USB cable, so it's easy to charge at work and at home!
Key features: - Replacement or extra mounts for all Bontrager Flare rear lights - Use to mount Flare lights to seatposts, racks, seatstays, or any other creative spot - Kit includes Flare light mount, two bases, and rubber strap adapters
Key features - Reflector mount for first and second generation Speed Concept seatposts - To use with a Bontrager Flare, use with the Bontrager Flare Horizontal Mounting Kit (sold separately)
Key Features - Perfect for mounting compatible Flare taillights to rear rack - Includes a bolt and star washer for extra security - Easiest to install with light installed for better leverage
Key features: - Provide quick installation on handlebars, seatposts, and more - Fits all Ion headlights and Flare tail lights - Rear strap includes 16 degree offset for optimized use on seatposts - Rear strap works best with 27.2 - 31.6mm seatposts - Front strap works best with 22.2 - 35.0mm handlebars
- For use with all Flare tail lights - Perfect for attaching to a seat pack, belt, backpack, or anything with a loop
Taillight Seat Stay Mount
- Attaches to rear racks - Compatible with: Blinky 3,5,7 and Superflash - 25mm between each of the top horizontal holes (center to center) - Requires an "L bracket" that typically comes with a rear rack. If your rack is missing the L bracket, you can purchase Planet Bike's rack hardware pack
- Mounts Beamer and Blaze 1/2W lights to a helmet - Compatible with Beamer 1, Beamer 3, Beamer 5, Blaze 1/2W and Blaze 2W Micro, Blaze 140 SL, Blaze 180 USB - Increased weight and length of Blaze 300, 500, and 650 USB lights may cause awkward mounting on helmet
- Fits seatpost (up to 31.8mm) or seatstay - Compatible with: Blinky 3,5,7, all Superflash lights and Blinky Safety rear light - Use with Blinky Safety Front light bracket to fit oversize (~31.8mm) handlebars
- Mounts most AA flashlights to handlebars and helmets - Ideal low-cost lighting alternative for cyclists
- Fits 25.4-31.8mm handlebars - Compatible with Blaze, Beamers, 1200, 5000x and Super Spot
The tool-free bracket allows for a wide variety of mounting options for MSW's TigerMoth headlight.
The Portland Design Works Mission Control 2.0 Headlight Mount is now easier to use! Wrap the heavy-duty UV-proof rubber strap around your handlebars and you're ready to blast off in seconds. - Fits 22.0-31.8 mm diameter handlebars - Compatible with all PDW headlights.
The original Mission Control Bracket is compatible with all Portland Design Works headlights and fits handlebars 22.0-31.8mm in diameter. It provides a rigid mount to keep your headlight exactly where you need it when the going gets rough. And, it allows the light to be rotated left or right a few degrees to center the light beam on bars that are not straight.
The Portland Design Works Stayputnik tail light bracket has a UV-proof rubber strap to securely hold your tail light on nearly any size seat post. - Mounts in seconds and is compatible with every Portland Design Works tail light except Asteroid and Fenderbot. - UV proof rubber strap - Compatible with every PDW tail light except Asteroid and Fenderbot
Mount your tail light to the reflector tab on the back of a rear cargo rack with this Rack Bracket from Portland Design Works. - Compatible with all PDW rear lights except the Asteroid and Fenderbot - Horizontal holes are 50mm apart to fit European rack standards - Vertical holes are 18mm apart to fit most reflector mounts
• Compatible with all Flare taillights and Ion headlights from both Trek and Bontrager • Fits most bars/seatposts (22.2-31.8mm), some helmets and Madone integrated seat masts • Silicone body with a tooled adjustment handlebar clamp diameter • 20-degree +/- side-to-side adjustment • 16-degree seatpost angle adjustment integrated into SyncV2 bracket
USB cable for USB rechargeable batteries. System Compatibility: - Lumina Series - Lightning Bug 120 USB - Sentinel 2W USB - Solas 2W USB - Stinger USB
Lezyne's Composite Bar Mount is a hard mount made of a reinforced Composite Matrix cradle for a strong and secure attachment of the Mega Drive, Deca Drive, and XL LED lights to the handlebar. It is designed for 25.4 mm or 31.8 mm bars, with the cradle designed to pivot 15 degrees laterally to allow adjustment of the LED light beam angle and directing it where it is most needed. A large thumb screw secures the CM mount to the bar without need of tools, and can be tightened by hand or a 1mm hex key. Molded rubber shims add grip and fine-tune fitting to undersized bars. Composite Bar Mounts are sold in a kit with the Mega Drive, Deca Drive, or XL LED lights.
The NiteRider Tail Light Strap Mount allows for quick installation and fitment on to standard seatposts. It features a quick release tab that allows you to remove just your tail light, leaving the strap mount installed on the seat post; ideal for when you leave your bike unattended or when it’s time for a recharge.
-Mounts easily to front racks with threaded M5 mounts -Allows for unobstructed light positioning -22.2mm clamping diameter
Key features: - Replacement InnerGlo LED light strips for select Bontrager Town clothing - Compatible with Bontrager Town Stormshell Jacket, Town Stormshell Women's Jacket, and Town Stormshell Pants - Sold individually
Key features: - Easily integrate your Bontrager Flare tail light on your Madone 9 Series - Quick release designs matches perfectly on the Madone 9 proprietary seatpost clamp
Page 1 of 9 Next page